Vinyl decal preparations.

Vinyl decal preparations.

Aug 28

One of the most important parts of installing vinyl lettering is preparing the surface where you will be installing it. If you do not prepare your surface properly you may still be able to make your vinyl letter or decal adhere to the surface but the problem will arise later down the road and this is definitely not something you just want to let happen. Basically the edges of the vinyl will start peeling off and sometimes even curling and you will not get the full life of your product, and who wants to pay money for something that they will need to replace within a year or so. Maybe even less!

So start by cleaning the substrate with a cleaning solution (soap and water, Windex or any other type of cleaner). Make sure to get everything off that you can, since you don’t want anything between the vinyl’s adhesive and the contact point on the vehicle. Make sure to rinse it thoroughly and then use some alcohol to remove any cleaning solution residue. Also, make sure the setting you’re doing this in the right temperature. 60°F-120°F is the recommended temperatures. The reason for this is a bit technical, but it really makes a huge difference in how well the vinyl lettering binds to your vehicle. Now your surface should be ready for applying your vinyl decals or graphics.

When applying it to a freshly painted vehicle, boat or trailer, make sure that the paint is cured otherwise it can cause the vinyl to bond with the paint and you will have problems when you try to remove the vinyl years down the road.

If you are applying it to a wall or a door on a building or an aluminum substrate, make sure that it has a smooth glossy finish so that the vinyl will adhere to it better.  Vinyl Banners will stick very well to a glass window and smooth acrylic surfaces, just make sure that you clean your surface wherever you are planning on installing your vinyl lettering/decal.